Honeywell HRSD40F250 User Guide - Page 123

Operation Figure 4-17 Event Log Search Option Window Option From To Time Overlap Alarm-In Motion Video Loss Table 4-4 Function Event Log Search Options Either enable First (highlight the box and press ), which means that the DVR begins the search at the first recorded image. OR Disable First and then enter a specific time and date from which the DVR begins the search. Either enable Last, which means that the DVR ends the search at the last recorded image. OR Disable Last and then enter a specific time and date at which the DVR ends the search. Enable or disable Time Overlap by highlighting the box and pressing . This option is only available if you have defined From and To times. If the DVR's date and time have been reset, it is possible for the DVR to have more than one overlapping start and stop time. When set to On, you will be asked to select one of the overlapping start and stop times. When set to Off, the DVR will display search results from all start times to all stop times. Highlight the box beside Alarm-In and press inputs are included in your search. . You can select which alarm Highlight the box beside Motion and press . You can select the cameras for which you want any reports of motion detection. Highlight the box beside Video Loss and press for which you want any reports of lost video. . You can select the cameras Document 800-03097 Rev C 123 03/09