Honeywell HRSD40F250 User Guide - Page 93
Text-In Device Generic Text and EPSON-POS Settings, Screen, Setup°, Text-In Product
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Configuration Figure 3-63 Text-In Device (Generic Text and EPSON-POS) Settings Screen 3. Highlight the field beside Port, and press and USB-Serial (1~4). . Select from None, RS232, RS485 Note If you have set the Port as None, then you will not be able to make any changes to the screen. Note When using the USB to serial text-in device, do NOT remove the USB cable from the port while the system is running. 4. Highlight Setup..., and press . Use the ATM or POS manufacturer's recommended settings when configuring the RS232, RS485 or USB-Serial ports. 5. Highlight the field beside Text-In Product, and press from the list. . Select your device Note The screen changes for different types of text input devices, and there will be different parameter boxes for you to enter information. Document 800-03097 Rev C 93 03/09