Honeywell HRSD40F250 User Guide - Page 58
Setting LAN Parameters Manually, HRSD40F DVR User Guide, Manual, ADSL PPPoE, DNS Server
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
HRSD40F DVR User Guide Figure 3-23 LAN (Manual) Setup Screen Highlight the field beside Type and press ADSL (PPPoE). to select from Manual, DHCP, and Setting LAN Parameters Manually 1. Select Manual from the Type field to set up LAN parameters manually. Note You need to get the appropriate IP Address, Gateway, and Subnet Mask from your network administrator. 2. Change the numbers by highlighting them and using the Up and Down arrows to increase or decrease the number. The factory default LAN settings are: IP Address:192.168.1.129 Gateway: 192.168.1.254 Subnet Mask:255.255.255.0 3. Highlight the field beside DNS Server and press to enter the IP address of the DNS server. If you set up the DNS Server, you can use the domain name of the DVRNS server instead of the IP address during the DVRNS Server setup. See Registering the Network for DVRNS Service on page 61 for details. 4. Highlight Port Number Setup... and press appears. . The Port Number Setup screen 58