Honeywell HRSD40F250 User Guide - Page 64
Setting Up Mail Notification, HRSD40F DVR User Guide, Enable, SMTP Server, Use SSL/TLS, Authentication
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Setting Up Mail Notification HRSD40F DVR User Guide 1. Highlight Enable and press to toggle between On and Off. You can change these settings only if Mail is enabled. 2. Highlight the box beside SMTP Server and press . A virtual keyboard appears so you can enter the IP address or domain name of the SMTP server. Note You will need to get the IP Address or domain name of the SMTP Server from your network administrator. Note You can use the domain name instead of IP address if you have already set up the DNS Server when setting up the LAN. 3. Highlight the box beside Port and press . Use the arrow buttons to enter the SMTP Server port number you obtained from your system administrator. The default port number is 25. 4. Highlight Use SSL/TLS and press to toggle between On and Off. When it is On, the DVR can send an e-mail via an SMTP server requiring SSL (Secure Sockets Layer) authentication. 5. Highlight the box beside Authentication and press screen appears. . An Authentication Figure 3-30 Authentication Screen 6. Highlight Use and press to toggle between On and Off. Highlight the field beside User and Password and press . A virtual keyboard appears so you can enter the user ID and password. Click OK when finished. 7. Highlight the field beside Sender and use the virtual keyboard to enter the sender's e-mail address. 8. Highlight the field beside Recipient and use the virtual keyboard to enter the recipient's e-mail address. Click OK when finished. 64