Honeywell HRSD40F250 User Guide - Page 35
Arrow Buttons, ENTER/PAUSE, Button, PANIC Button, PTZ/ZOOM Button, Table 3-1, DVR Front Panel Controls
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Configuration # Control Table 3-1 DVR Front Panel Controls Function 5 Arrow Buttons Use the arrows to navigate through menus and GUI. You can also use them to change numbers by highlighting a number in the menu and using the Up and Down arrow buttons to increase or decrease the number's value. You can also use them to control Pan and Tilt in the PTZ mode. In playback mode, press to play video backward at high speed. Press again to toggle the playback speed from , , and . The screen displays , , and respectively. Press to play video forward at high speed. Press again to toggle the playback speed from , , and . The screen displays , , and respectively. In pause mode, the Up arrow selects the next image, and the Down arrow selects the previous image. 6 ENTER/PAUSE Button Press (Enter/Pause) to select a highlighted item or complete an entry that you have made during system setup. In Live Monitoring mode, press The screen displays . Press monitoring mode. to freeze the current live screen. again to return to the live 7 PANIC Button Press (Panic) to activate panic recording of all camera channels. When the DVR is in the Panic recording mode, displays on each camera screen. Press again to release the panic recording. Note When the DVR does not detect a VGA monitor automatically, pressing and holding for five seconds or longer switches the video output to VGA out manually. 8 PTZ/ZOOM Button In Live Monitoring mode, press (PTZ/Zoom) to open the Pan/Tilt/Zoom screen, where you can control properly configured cameras. Press again to exit PTZ mode and enter Zoom mode. In Zoom mode, press monitoring mode. to exit zoom mode and return to live If a PTZ device is not installed or if no PTZ camera has been set up in Camera setup, you can press to directly enter the digital zoom mode. In PTZ mode, press the Arrow buttons or configured cameras. to control properly Note When the DVR is in Zoom mode, a rectangle displays on the screen. The rectangle indicates the area that will be enlarged. You can move the rectangle around using the Arrow buttons. Pressing enlarges the area in the rectangle. Document 800-03097 Rev C 35 03/09