Honeywell HRSD40F250 User Guide - Page 128

HRSD40F DVR User Guide Option Table 4-6 Function Motion Search Options From Either enable First (highlight the box and press ), which means that the DVR begins the search at the first recorded image. OR Disable First and then enter a specific time and date from which the DVR begins the search. To Either enable Last, which means that the DVR ends the search at the last recorded image. OR Disable Last and then enter a specific time and date at which the DVR ends the search. Type Highlight the box beside Type and press . Select between Motion Search and Museum Search. Motion Search detects motion in the defined area. Museum Search detects if a defined object has moved. Zone Highlight the box beside Zone and press . An image from the video appears with a grid overlaid. You can turn sensor blocks On and Off to define the area of the picture in which you want to search for motion. The zone should be placed or focused on the centre or, at least, within the outline of targeted object. Note When setting the Museum Search Zone, the zone should be placed inside the border line of the target object. If the selected block is placed on the border line, then the sensitivity of the Museum Search may decrease. Sensitivity Highlight the box beside Sensitivity and press (low sensitivity) to 5 (high sensitivity). . Select from 1 Min. Blocks Highlight the box beside Min. Blocks and press . Set the number of sensor blocks that must be activated. Setting the Min Blocks will only be available if Motion Search is selected. 1. Set your search conditions based on the options shown in Table 4-6. 2. Select Search and press screen. . The search results appear in the Motion Search 3. Select Cancel to exit the screen without saving the changes. Note If you choose to search for motion events for another camera, you will be asked whether or not you want to delete the previous search results from the list. 128