Honeywell HRSD40F250 User Guide - Page 80
Setting the DVR to React to Events, Configuring the Alarm-In Settings
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
HRSD40F DVR User Guide Save your changes by highlighting Save and pressing screen without saving the changes. . Select Cancel to exit the Setting the DVR to React to Events You can program the DVR to detect and to react to many different events. You can program it to: • Record • Activate the alarm output • And/or notify the remote site whenever alarm, motion, text-in, or video loss events are detected Configuring the Alarm-In Settings The alarm terminal strip on the back of the DVR has inputs associated with each alarm. You can: • Set up each input on the Alarm-In Setup screen • Turn each input On (via Alarm I/O or Camera Alarm) or Off • Give each input a title • Independently set the inputs as NO (normally open) or NC (normally closed) Highlight Alarm-In in the Event menu and press . Figure 3-48 Event Menu The Alarm-In setup screen appears. 80