Honeywell HRSD40F250 User Guide - Page 111
Setting PTZ Camera Preset Positions, Saving a Preset Camera Position, Using the PTZ Menu
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Operation Change the toolbar location by clicking the empty space on the left side of the toolbar and dragging it to where you want it located on the screen. Setting PTZ Camera Preset Positions Using the PTZ Menu 1. Press while in the PTZ mode. The PTZ feature menu appears. Figure 4-5 PTZ Feature Menu 2. Set the feature you wish to control by selecting it from the menu. Refer to the camera manufacturer's instructions for the proper settings. Note Depending on the camera specifications, some features may not be supported. 3. Exit the PTZ Menu by either: Clicking Set Preset to save the settings (see below). Or Clicking Quit to close the menu without saving the settings. Saving a Preset Camera Position After you have the camera at the desired settings, you can save camera position settings as presets so that you can go directly to desired views. 1. Select Set Preset in the PTZ Menu. The PTZ Preset screen appears. Document 800-03097 Rev C 111 03/09