Honeywell HRSD40F250 User Guide - Page 39
Resetting to Default Settings, Logging On, Opening the Setup Screen, Login Screen
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Configuration Resetting to Default Settings Throughout the screens you will see . Highlight and press that screen to its default settings. (ENTER) to reset Logging On 1. Press (Menu) on the front panel or remote control. The Login screen appears. Figure 3-4 Login Screen 2. Select a User and enter the password by pressing the appropriate combination of camera number buttons and then . There is no default password when logging on as the admin user for the first time. Note To assure the secure management of the system, Honeywell strongly recommends that you set up a password. Note You can use a mouse (not supplied) to access the Login screen in addition to using the front panel buttons or the infrared remote control. Click the right mouse button to display the Login screen. To enter a password, click the ... button, and the virtual keyboard displays. See instructions below for the virtual keyboard. Opening the Setup Screen Press Press to enter the Setup screen. Use the arrows to move through the options. to make your selections. Document 800-03097 Rev C 39 03/09