Honeywell HRSD40F250 User Guide - Page 108
Adjusting the Live Monitoring Image, Entering and Exiting Sequence Mode
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
HRSD40F DVR User Guide Clicking on the area you want enlarged OR Clicking and holding down the mouse button while you drag the image Adjusting the Live Monitoring Image Note It is important that cameras and monitors are correctly installed and adjusted prior to making any image adjustments using the DVR's controls. A user who has Color Control authority, who has logged into the system, can adjust the image. Press and hold a camera button for a few seconds to display an image adjustment dialog box. You can control brightness, contrast, hue and saturation for each camera. Note Any image adjustments you make will be applied to both the live video on the monitors and the recorded video. Entering and Exiting Sequence Mode Press and hold , the MENU button on the front panel, for three seconds or longer to start displaying the cameras sequentially. Press a camera button to exit the Sequence mode. Monitoring Event-Detected Video Select Event Monitoring On in the Display setup screen (OSD tab). Then, when an event occurs, the DVR displays the event-detected video in full-screen on the monitor for the preset dwell time. After the dwell time has elapsed, the monitor returns to the previous screen unless another event has occurred. The monitor displays video from the lowest numbered camera of the cameras associated with the event-detected sensor. After the event monitoring dwell time passes, the DVR returns to the previous screen unless another event occurs. When event monitoring is activated, the monitoring for all other subsequent events is ignored. If you want to return to the live monitoring mode before the dwell time has elapsed, press one of the camera buttons. 108