Honeywell HRSD40F250 User Guide - Page 137
Reviewing Video Clips C
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Reviewing Video Clips C Reviewing Video Clips You do not need to install any special software on your personal computer to review the video clips. The copied video clip contains the ClipPlayer program. If you used a USB device, disconnect either the external USB-IDE hard disk drive or USB flash drive from the DVR, and connect it to your PC. If you used a recordable CD, insert the CD in your computer's CD drive. Double-clicking the target clip file starts the ClipPlayer program. Note It is suggested that the computer used for the ClipPlayer program has at least an 800MHz Pentium III. If your CPU is slower than this, video clips recorded at maximum speed with very high image quality play back slowly. Also DirectX 9.0 or higher is required to run Clip Player, and a VGA card with 16MB or more video RAM is recommended for proper operation. Figure C-1 ClipPlayer Screen The ClipPlayer Screen displays the clip images. Document 800-03097 Rev C 137 03/09