Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 174

Sending Functions Backgrnd Density Removes dark background from originals, such as newspapers. If the ground color is obtrusive, select [Auto]. If [Auto] does not remove the ground color, select [Manual] and adjust the density of the ground color. The setting items are as follows. Item Off Auto Manual Description Does not adjust the ground color. Automatically adjusts the background density based on the original. Manually adjust the density in 5 levels. When [Manual] is selected, press [1 (Lighter)] to [5 (Darker)] to adjust the background density. The procedure for adjusting the background density of copies is explained below. 1 Press the Send key. 2 Place the originals in the document processor or on the platen. Function Menu: a b *1**C*o*l*o*r**S*e*l*e*c*t*i*o*n**T** 2 Original Size T 3 Original Image T [ Exit ] 3 Press the Function Menu key. Function Menu appears. Backgrnd Density: a b *1 **O*f*f 2 Auto 3 Manual 4 Press the  or  key to select [Backgrnd Density]. 5 Press the OK key. Backgrnd Density appears. Manual: a b 3 3 4 4 *5**5**(*D*a*r*k*e*r*)********* 6 Press the  or  key to select [Off], [Auto] or [Manual]. 7 Press the OK key. When [Manual] is selected, Manual appears. Press the  or  key to select [1 (Lighter)] to [5 (Darker)] and then press the OK key. Completed. is displayed and the screen returns to the basic screen for copying. 8 Press the Start key to start sending. NOTE: Press the Reset key to reset the settings selected in Function Menu. 5-24