Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 370

Default Setting (System Menu) Secure Protocol: a b 2 IPP Security 3 HTTP Security *4**L*D*A*P**S*e*c*u*r*i*t*y****** [ Exit ] 5 Press the  or  key to select [Secure Protocol]. 6 Press the OK key. Secure Protocol appears. LDAP Security: a b *1 **O*f*f 2 SSL/TLS 3 STARTTLS 7 Press the  or  key to select [LDAP Security]. 8 Press the OK key. LDAP Security appears. 9 Press the  or  key to select [Off], [SSL/TLS] or [STARTTLS]. 10 Press the OK key. Completed. is displayed and the screen returns to the Secure Protocol menu. SMTP Security Select the communication protocol according to the type of security employed by the SMTP server. The default setting is Off. NOTE: SMTP (E-mail TX) must be set to On in Protocol Detail on page 8-151. The table below shows the available settings. Item Off SSL/TLS STARTTLS Description Do not use security employed by the SMTP server. Encryption is applied any data communication. To enable SMTP security, the SMTP port may have to be changed according to the server settings. Typically, 465* for SSL/TLS is well-known SMTP port. Encryption is applied any data communication. Typically, 25* or 587* for STARTTLS is well-known SMTP port. * You can change the port number using Command Center RX. Use the procedure below to make the setting. Sys. Menu/Count.:a b 1 Report 2 Counter *3 **S*y*s*t*e*m*/*N*e*t*w*o*r*k***** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [System/Network], and press the OK key. 8-160