Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 398
Corrective Actions, Troubleshooting, Unblock
View all Kyocera ECOSYS M2035dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 398 highlights
Troubleshooting Symptom Check Points Cannot print with USB memory. Is the USB host blocked? - When displaying an image sent from the machine on the PC, an image size is shrunk vertically or horizontally. USB memory not recognized. Have you selected 200×100dpi Normal or 200×400dpi Super Fine for the scan resolution? - Is the USB host blocked? Vertical streaks appear on prints. The top edge or back of the paper is dirty. Part of the image is periodically faint or shows white lines. Is the slit glass dirty? The inside of the machine may be dirty. The inside of the machine may be dirty. Is the developer unit attached correctly? - Corrective Actions Reference Page Select Unblock in the USB host settings. Check that the USB memory is securely plugged into the machine. Select a scan resolution other than 200 × 100dpi Normal or 200 × 400dpi Super Fine when sending an image. 8-173 - 5-12 Check that the USB memory is securely plugged into the machine. Select Unblock in the USB host settings. Clean the slit glass. Check the toner container and if necessary replace. Clean the inside of the machine. - 8-173 9-2 9-5 9-3 Attach the developer unit correctly. - Open and then close the rear - cover. 10-4