Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 255

Default Setting (System Menu) Function Defaults Defaults are the values automatically set after the warm-up is completed or the Reset key is pressed. Set the defaults for available settings such as copying and sending. Setting the frequently-used values as defaults makes subsequent jobs easier. Color Selection Select the default color mode setting. The available default settings are shown below. Color mode Description Auto(Color/Gray) Automatically recognizes whether the document is color or black and white, and scan color documents in Full Color and black and white documents in Grayscale. Auto(Color/B&W) Automatically recognizes whether the document is color or black and white, and scan color documents in Full Color and black and white documents in Black and White. 8 Full Color Scan document in full color. Grayscale Black & White Scan document in grayscale for smoother and finer finish. Scan document in black and white. Use the procedure below to select the default color mode setting. Sys. Menu/Count.: a b 3 System/Network 4 User/Job Account *5**C*o*m*m*o*n**S*e*t*t*i*n*g*s**** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [Common Settings]. Common Settings: a b *1 **L*a*n*g*u*a*g*e*********** 2 Default Screen 3 Sound [ Exit ] 2 Press the OK key. The Common Settings menu appears. Function Default: a b *1**C*o*l*o*r**S*e*l*e*c*t*i*o*n**** 2 Scan Resolution 3 FAX Resolution [ Exit ] 3 Press the  or  key to select [Function Default]. 4 Press the OK key. The Function Default menu appears. 8-45