Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 454

Removing the Memory Module Verifying the expanded memory Network Interface Kit (ECOSYS M2030dn/ECOSYS M2035dn only) To remove a memory module, remove the right cover and the memory slot cover from the machine. Then, carefully push out the two socket clamps. Ease the memory module out of the socket to remove. To verify that the memory module is working properly, test it by printing a status page. The Network Interface Kit provides a high-speed connection for the Gigabit-per-second interface. Since the kit was designed to work with TCP/IP, and NetBEUI protocols, it fulfills the network printing demands on Windows, Macintosh, and UNIX environments. Option Interface Slot Wireless Network Interface Kit (ECOSYS M2030dn/ECOSYS M2035dn only) This is a wireless LAN interface card which supports the wireless LAN specifications IEEE802.11n (Max 300 Mbps) and 11 g/b. With the utilities supplied, settings are possible for a variety of OS and network protocols. Option Interface Slot Card Authentication Kit(B) User login administration can be performed using ID cards. To do so, it is necessary to register ID card information on the previously registered local user list. For more information about how to register this information, refer to the Card Authentication Kit(B) Operation Guide. Appendix-4