Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 97

Preparation before Use Loading Originals Follow the steps below to load originals for copying, sending or storing. 2 Placing Originals on the Platen You may place books or magazines on the platen in addition to ordinary sheet originals. 1 Open the original cover or the document processor. NOTE: Before opening the document processor, be sure that there are no originals left on the original table or on the original eject table. Originals left on the original table or on the original eject table may fall off when the document processor is opened. Keep the document processor open if the original is 25 mm or thicker. 2 Place the original. Put the scanning side facedown and align it flush against the original size indicator plate with the back left corner as the reference point. 3 Close the the original cover or the document processor. IMPORTANT: Do not push the original cover forcefully when you close it. Excessive pressure may crack the platen glass. Do not close the document processor when the original is 25 mm or thicker. NOTE: Shadows may be produced around the edges and in the middle of open-faced originals. CAUTION: Do not leave the document processor open as there is a danger of personal injury. 2-59