Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 52
Network Setup (LAN Cable Connection), Command Center RX User Guide, Submenu, Setting
View all Kyocera ECOSYS M2035dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Preparation before Use Network Setup (LAN Cable Connection) The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4), TCP/IP (IPv6), NetBEUI and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms. The table below shows the items required for each of the settings. Configure the printer's network parameters as appropriate for your PC and your network environment. For details of the procedure, refer to the Network Setup on page 8-136 or Network Security on page 8-154. NOTE: When Command Center RX is used, network parameters and security settings can be conveniently changed and checked from your PC. For more information, refer to the Command Center RX User Guide. Menu System/ Network Network Setting TCP/IP Settings Submenu TCP/IP IPv4 Setting IPv6 Setting Bonjour Protocol Detail DHCP Auto-IP IP Address Subnet Mask Default Gateway NetBEUI SNMPv3 FTP (Server) FTP (Client) SMB SNMP SMTP (E-mail TX) POP3 (E-mail RX) RAW Port LPD IPP IPP Over SSL HTTP Setting On/Off On/Off On/Off IP address IP address IP address On/Off On/Off On/Off On/Off On/Off On/Off Port number: 21 On/Off On/Off On/Off On/Off On/Off On/Off On/Off Port number: 631 On/Off On/Off 2-14