Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 245

Default Setting (System Menu) Low Power Timer The time until the machine enters low power mode can be set. The range that can be set is as follows. Value For Europe 30 ppm model: 1 to 60 minutes (1minute increments) 35 ppm model: 1 to 120 minutes (1minute increments) Except for Europe 1 to 240 minutes (1minute increments) Use the procedure below to set the Low Power Timer. The default setting is 1 minute. Sys. Menu/Count.: a b 3 System/Network 4 User/Job Account *5**C*o*m*m*o*n**S*e*t*t*i*n*g*s**** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [Common Settings]. 8 Common Settings: a b *1 **L*a*n*g*u*a*g*e*********** 2 Default Screen 3 Sound [ Exit ] 2 Press the OK key. The Common Settings menu appears. Login User Name: L b Login Password: [ Login ] 3 Press the  or  key to select [Timer Setting], and press the OK key. A login screen will appear. Then, enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). Timer Setting: a b *1**A*u*t*o**P*a*n*e*l**R*e*s*e*t*** 2 PanelReset Timer 3 Low Power Timer [ Exit ] 4 The Timer Settings menu appears. 5 Press the  or  key to select [Low Power Timer]. 8-35