Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 397
Check Points, Left Select
View all Kyocera ECOSYS M2035dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 397 highlights
Troubleshooting Symptom Printouts are dirty. Printouts are fuzzy. Images are skewed. Check Points Is the platen or the document processor dirty? Is the machine being used in very humid conditions? Are the originals placed correctly? Cannot feed originals. Is the paper loaded correctly? Are the originals placed correctly? Paper often jams. Printouts are wrinkled or curled. Cannot print. Is the paper loaded correctly? Is the paper of the supported type? Is it in good condition? Is the paper curled, folded or wrinkled? Are there any loose scraps or jammed paper in the machine? Is the paper damp? Is the machine plugged in? Is the machine powered on? Is the printer cable connected? Was the machine powered on before the printer cable was connected? Is the print job paused? Documents are printed improperly. Is the error message displayed? Are the application software settings at the PC set properly? Corrective Actions Clean the platen or the document processor. Use in a location that has suitable humidity. When placing originals on the platen, align them with the slit glass. When placing originals in the document processor, align the original width guides securely before placing the originals. Check the position of the paper width guides. When placing originals in the document processor, align the original width guides securely before placing the originals. Load the paper correctly. Remove the paper, turn it over, and reload it. Replace the paper with new paper. Remove any jammed paper. Replace the paper with new paper. Plug the power cord into an AC outlet. Turn on the power switch. Connect the correct printer cable securely. Power on the machine after connecting the printer cable. Press [Resume] (the Left Select key) to resume printing. Follow the corresponding procedure. Check that the printing system driver and application software settings are set properly. Reference Page 9-2 - 2-59 2-60 2-60 2-60 2-46 2-46 2-46 10-13 2-46 - 2-6 2-5 2-5 2-6 7-19 10-6 - 10 10-3