Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 405

Troubleshooting Error Message Send error. #### Check Points The developer unit is not installed. The phone receiver is off the hook. Hang Up. Toner is running out. Unknown toner Installed. PC USB memory error. Job is canceled. Is the developer unit installed correctly? - - Does the installed toner container's regional specification match the machines's? - Corrective Actions Reference Page 2101, 2102, 2103, 2201, 2202, 2203, 3101: The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is not set correctly. Use Command Center RX and register the SMTP server name and the host name correctly. 2204: Check the E-mail size limit of the SMTP settings on the Command Center RX. - 5101, 5102, 5103, 5104, 7102, 720f: Turn the power switch off and back on. If this error occurs several times, make a note of the displayed error code and contact your service representative.(Refer to the corrective action for the error message " An error has occurred.") 9181: The scanned original exceeds the acceptable number of pages of 999. Send the excess pages separately. Contact your service technician. - Put down the receiver. - Prepare the toner container. 9-5 Install the specified container. 9-5 This job is canceled. Press the OK - key. 10 10-11