Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 89

Preparation before Use 3 Adjust the position of the paper guides on the MP tray. Standard paper sizes are marked on the MP tray or Manual Feed tray. For standard paper sizes, slide the paper guides to the corresponding mark. 2 4 Align the paper with the paper guides and insert as far as it will go. IMPORTANT: Keep the side that was closest the package seal facing up. Curled paper must be uncurled before use. Straighten the top edge if it is curled. When loading paper into the multi purpose tray, check that there is no paper left over in the tray from a previous job before loading the paper. If there is just a small amount of paper left over in the multi purpose tray and you want to add more, first remove the left-over paper from the tray and include it with the new paper before loading the paper back into the tray. Loading Envelopes 1 envelope may be loaded in the multi purpose tray. Acceptable envelope sizes are as follows. Acceptable Envelope Hagaki Oufuku Hagaki Youkei 2 Youkei 4 Monarch Envelope #10 (Commercial #10) Envelope DL Envelope C5 Executive Envelope #9 (Commercial #9) Envelope #6 (Commercial #6 3/4) Size 100 × 148 (mm) 148 × 200 (mm) 114 × 162 (mm) 105 × 235 (mm) 3 7/8" × 7 1/2" 4 1/8" × 9 1/2" 110 × 220 (mm) 162 × 229 (mm) 7 1/4" × 10 1/2" 3 7/8" × 8 7/8" 3 5/8" × 6 1/2" 2-51