Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 383

Default Setting (System Menu) Interface Block Setting This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional interfaces. The following interface block settings are available: • USB Host (USB memory slot setting) • USB Device (USB interface setting) • USB Storage (USB storage setting) • Optional interface (Optional interface card setting) USB Host (USB memory slot setting) This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock. Use the procedure below to specify the USB Host setting. Sys. Menu/Count.:a b 1 Report 2 Counter *3 **S*y*s*t*e*m*/*N*e*t*w*o*r*k***** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [System/Network], and press the OK key. 8 Login User Name: L b Login Password: [ Login ] A login screen will appear. Then, enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). System/Network: a b *1**N*e*t*w*o*r*k**S*e*t*t*i*n*g**** 2 I/F Block Set. 3 Security Level [ Exit ] 2 The System/Network menu appears. I/F Block Set.: a b *1**U*S*B**H*o*s*t*********** 2 USB Device 3 USB Storage [ Exit ] 3 Press the  or  key to select [I/F Block Set.]. 4 Press the OK key. The I/F Block Set. menu appears. 5 Press the  or  key to select [USB Host]. 8-173