Kyocera ECOSYS M2035dn ECOSYS M2030dn/M2035dn/M2530dn/M2535dn Operation Guide - Page 247

Default Setting (System Menu) Sleep Rules: a b 1***N*e*t*w*o*r*k************ 2 Card Reader 3 FAX [ Exit ] 5 Press the  or  key to select [Sleep Rules]. 6 Press the OK key. Sleep Rules appears. Network: a b *1 ***O*f*f 2 On 7 Press  or  key to select the condition to be set. 8 Press the  or  key to select [Off] or [On]. 9 Press the OK key. Completed. is displayed and the screen returns to the Sleep Rules menu. Sleep Level (models except for Europe) 8 There are two sleep modes with different levels of sleep: Quick Recovery and Energy Saver. Quick Recovery Mode: The recovery from the sleep mode is faster than when using Energy Saver mode. Energy Saver Mode: This makes it possible to reduce energy consumption even further than with Quick Recovery mode. With Energy Saver mode, you can set whether to enable the Energy Saver mode for each separate function. NOTE: For information on the Quick Recovery mode and Energy Saver mode, refer to Energy Saver Function on page 2-7. Sys. Menu/Count.: a b 3 System/Network 4 User/Job Account *5**C*o*m*m*o*n**S*e*t*t*i*n*g*s**** [ Exit ] 1 In the Sys. Menu/Count. menu, press the  or  key to select [Common Settings]. Common Settings: a b *1 **L*a*n*g*u*a*g*e*********** 2 Default Screen 3 Sound [ Exit ] 2 Press the OK key. The Common Settings menu appears. 3 Press the  or  key to select [Timer Setting], and press the OK key. 8-37