Kyocera FS 3830N FS-3820N/3830N Operation Guide Rev-1.1 - Page 200
Network Interface Card, network environments including Windows, Macintosh, UNIX, NetWare
View all Kyocera FS 3830N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Installing Option Units Network Interface Card Insert the option network interface card into the option interface slot at the rear of the printer. Along with the standard for the network interface on the printer, the network interface card supports TCP/IP, IPX/SPX, NetBEUI, and EtherTalk protocols, so that the printer can be used on network environments including Windows, Macintosh, UNIX, NetWare, etc. 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove the two screws from the option interface slot cover. Option Interface Slot Cover Screws 3 Insert the network interface card and secure it with the screws removed in step 2. Network Interface Card Screws A-26
Installing Option Units
A-26
Network Interface Card
Insert the option network interface card into the option interface slot at the
rear of the printer. Along with the standard for the network interface on
the printer, the network interface card supports TCP/IP, IPX/SPX,
NetBEUI, and EtherTalk protocols, so that the printer can be used on
network environments including Windows, Macintosh, UNIX, NetWare,
etc.
1
Turn off the printer and disconnect the power cord and printer cable.
2
Remove the two screws from the option interface slot cover.
3
Insert the network interface card and secure it with the screws
removed in step 2.
Option Interface
Slot Cover
Screws
Network Interface
Card
Screws