Kyocera FS 3830N FS-3820N/3830N Operation Guide Rev-1.1 - Page 53
MP Tray Mode
View all Kyocera FS 3830N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Paper Handling MP Tray Mode Note The MP tray can be used in either of two modes - first or cassette. The MP tray feed paper differently depending on the mode: • Cassette Mode This is the default mode. The MP tray acts in the same manner as other paper source. The printer can correctly feed paper from any paper source as you command on the printer driver. The cassette mode provides a faster printing speed than the first mode. • First Mode The MP tray automatically feeds paper placed on the MP tray overriding another paper source that is selected on the printer driver. After all paper sheets in the MP tray have been used up (approximately 100 sheets [A4 size, 0.11 mm thickness]), paper will be fed from the paper source originally selected. This mode is convenient to feed paper of special size or type without reloading the current paper source. However, the MP tray must be kept empty if you desire to feed paper from the intended paper source. This menu does not appears when the option envelope feeder is installed on the printer. The maximum capacity for the MP tray of 100 sheets is based on A4 paper. If you use Legal size paper on the MP tray, the number of paper you use should be considerably smaller than 100 sheets to avoid possible paper jam. To switch the MP tray to First mode, proceed as follows: 1 Press the MENU key. 2 Press the or key repeatedly until Paper Handling > appears. Paper Handling > 3 Press the > key. 4 Press the or key repeatedly until >MP Tray Mode appears. >MP Tray Mode Cassette 1-37