Kyocera FS 3830N FS-3820N/3830N Operation Guide Rev-1.1 - Page 32
Software Version, Hardware Information, Memory, Installation Options, Network Status, Emulation
View all Kyocera FS 3830N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Printing Test Pages 1 - Software Version This information shows the firmware version and date of issue of the printer. 2 - Hardware Information This information shows various printer settings, such as the size and type of the paper in the paper cassettes. 3 - Memory This shows the amount of total memory installed in the printer, the amount of currently available memory, and the current status of the RAM disk. See Operating the Storage Device on page 1-81. 4 - Page Information This shows the print resolution, number of copies, and the total page count. 5 - Installation Options This shows the option(s) installed in the printer. 6 - Network Status This shows the IP address, Subnet Mask address, and Default Gateway address for the network interface card in the printer. 7 - Emulation This shows all available emulations of the printer. The printer is shipped from the factory with PCL 6 emulation selected as the default. 8 - Error Log This shows the last three instances of the following types of errors, listing them in the order of their occurrence: • KPDL (PostScript) errors • Memory card errors • Memory card, hard disk, RAM disk errors The most recent error is displayed on the top line of the Error Log. For error remedies, see section Error Messages on page 4-10. Error information is cleared when the printer's power is turned off. 9 - Toner Gauge This shows the approximate level of remaining toner. When the value is 100, the toner container is full. 1-16