Kyocera FS 3830N FS-3820N/3830N Operation Guide Rev-1.1 - Page 78

e-MPS 8 Press the or key to display the desired job title. 9 Press the ENTER key. The ID input line appears. Enter the four-digit access code entered in the printer driver and press the ENTER key. To enter the ID, press the < or > key to move the cursor to the number to be changed and then enter the correct number by pressing the or key. >Agenda ID 0000 10 You can set the number of copies to be printed. To increase the copy count, press the key; to decrease the copy count, press the key. >Agenda Copies 001 11 Press the ENTER key to finalize the copy count. The printer prints the specified number of copies for the job. Deleting a Private Job To delete a stored private job, proceed as follows: 1 Follow steps 1 through 8 in the above section. 2 When the title of the job to be printed is displayed (Agenda, in this example), press the ENTER key. Enter the four-digit access code entered in the printer driver and press the ENTER key. >Agenda Copies 001 3 Press the key repeatedly until Delete appears for the number of copies. >Agenda Delete _ 4 Press the ENTER key. The private job is deleted from the Microdrive. 1-62