Kyocera FS 3830N FS-3820N/3830N Operation Guide Rev-1.1 - Page 55
Selecting the Output Stack
View all Kyocera FS 3830N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Paper Handling Selecting the Output Stack The following procedure allows you to select whether printouts will be received by the top tray or to the rear tray. If an option sorter is installed, it can also be selected using the manner described below. 1 Press the MENU key. 2 Press the or key repeatedly until Paper Handling > appears. Paper Handling > 3 Press the > key. 4 Press the or key repeatedly until >Stack Select appears. >Stack Select Top tray FaceDn 5 Press the ENTER key. A blinking question mark (?) appears. >Stack Select ?Top tray FaceDn 6 Press the or key to display the desired destination. The output tray changes as shown below. Top tray FaceDn (Printer's top tray) [Default] RearTray FaceUp (Printer's rear tray) [Option rear tray required] Sorter FaceDn [Option sorter required] 7 When the desired paper source displayed, press the ENTER key. 8 Press the MENU key. The message display returns to Ready. 1-39