Kyocera TASKalfa 3050ci 3050ci/3550ci/4550ci/5550ci Operation Guide Rev-2.2011 - Page 331

Default Setting (System Menu) Use the procedure below to set the default Collate/Offset settings. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults. Press [ ] twice and [Change] of Collate/Offset. 3 Select the defaults for Collate and Offset respectively. 4 Press [OK]. JPEG/TIFF Print Select the image size (resolution) when printing JPEG or TIFF file. The table below shows the available settings. Item Fit to Paper Size Image Resolution Fit to Print Resolution Description Fit the image size to the selected paper size. Print at resolution of the actual image. Fit the image size to the print resolution. Use the procedure below to set the default JPEG/TIFF Print settings. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults. Press [ ] twice and [Change] of JPEG/TIFF Print. 3 Select the default for [Fit to Paper Size], [Image Resolution], or [Fit to Print Resolution]. 9 4 Press [OK]. XPS Fit to Page Reduces or enlarges the image size to fit to the selected paper size when printing XPS file. Use the procedure below to set the default XPS Fit to Page settings. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults. Press [ ] twice and [Change] of XPS Fit to Page. 3 Select [Off] or [On] for the default. 4 Press [OK]. Continuous Scan Set the continuous scan defaults. The available default settings are shown below. Item Off On Description Continuous scan not performed Continuous scan performed Refer to page 4-43 for Continuous Scan. 9-27