Lexmark Optra C Service Manual - Page 156

5045-001 Fuser Oil Bottle Case Assembly See Assembly 32-7. 1. Remove the fuser assembly. 2. Place the fuser on a flat surface. Note: Do not tilt the fuser. It contains oil that can spill. 3. Use the hypodermic syringe tool (11A2440) to withdraw the oil from the bottle case. Also remove the square cap from the oil tray and withdraw the oil from the oil tray. Store the oil withdrawn in the oil storage bottle tool (11A2441). 4. Pinch or stop up the tube between the oil bottle case and the oil tray to prevent oil from leaking out. 5. Place the fuser assembly on a shop towel or paper to catch any spilled oil. 6. Remove the two screws from the protective cover and remove the cover. 7. Disconnect the oil return line from the top of the bottle case. 8. Cut the tie off the tube between the oil bottle case and the oil tray and disconnect the tube. 9. Remove the four oil bottle case mounting screws and remove the case from the fuser. 4-30