Lexmark Optra C Service Manual - Page 183
Transfer Drum Solenoid, Repair Information 4-57
View all Lexmark Optra C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
5045-001 Transfer Drum Solenoid See Assembly 29-5. 1. Remove the transfer drum and holder assembly. 2. Remove the two springs from the attraction roller holder. 3. Remove the two springs from the discharge roller holder. 4. Remove the two extension springs holding the one end of the transfer drum sheet to the transfer drum. Note: Use cotton gloves to handle the transfer sheet. 5. Rotate the drum while peeling the sheet off the drum surface. 6. Pry off the two round plastic screw caps from the gripper assembly. 7. Remove the two screws from the gripper assembly and lay the assembly back. Do not remove the transfer sheet from the gripper assembly. Also, be careful to not damage the transfer sheet. 8. Rotate the drum to expose the solenoid connector and disconnect the connector. 9. Rotate the drum to expose the solenoid mounting screws. Remove the two screws from the solenoid and remove the solenoid from the drum. Repair Information 4-57