Lexmark Optra C Service Manual - Page 175
Rotary Manual Feed Assembly, Rear Cooling Fan, Repair Information 4-49
View all Lexmark Optra C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
5045-001 Rotary Manual Feed Assembly See Assembly 15-1. For cover removals, see "Cover Removals" on page 4-8. 1. Open the top cover and the front cover. 2. Remove the left side cover and rear cover. 3. Remove the EMC shield from the rear of the machine. 4. Disconnect J1004 from the HVPS. 5. Remove the lower fan and ducts. 6. Remove the mechanical controller PCB. 7. Remove the 3 screws and work the mechanical controller PCB mounting base up and out of the machine. 8. Remove the set screw and knob from rotator. 9. Remove the 4 rotator assembly mounting screws and pull the assembly out the back of the machine. Rear Cooling Fan See Assembly 7-7 and 7-8. For cover removals, see "Cover Removals" on page 4-8. 1. Remove the top cover. 2. Remove the left side cover and the rear cover. 3. Remover the EMC shield form the rear of the machine. 4. Disconnect the fan connector at the mechanical controller PCB. 5. Release the 2 latches on the duct work that secures the fan and pull straight out. Repair Information 4-49