Lexmark Optra C Service Manual - Page 162
Remove the two screws from the copper terminal jumper and, Remove the screws from lamp wires.
View all Lexmark Optra C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
5045-001 Note: Steps 12 through 14 may be skipped if an offset screwdriver is used to remove the screws behind the oil bottle case. 12. Use the hypodermic syringe tool (11A2440) to withdraw the oil from the bottle case. Also remove the square cap from the oil tray and withdraw the oil from the oil tray. Store the oil withdrawn in the oil storage bottle tool (11A2441). 13. Pinch or stop up the tube between the oil bottle case and the oil tray to prevent oil from leaking out. 14. Place the fuser assembly on a shop towel or paper to catch any spilled oil. 15. Remove the four screws from the oil bottle case and remove the case. 16. Remove the screws from lamp wires. 17. Remove the two screws from the copper terminal jumper and remove the jumper from the thermistor block. 18. Open the fuser delivery assembly. 19. Remove the two screws from the thermistor block. Slide the block up and out of the fuser. 4-36