Lexmark Optra C Service Manual - Page 182
Transfer Drum Gripper Assembly, See Assembly 29-2.
View all Lexmark Optra C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
5045-001 Transfer Drum Gripper Assembly See Assembly 29-2. Note: Also order a transfer sheet, since damage to the sheet may occur when removing it from the gripper assembly. 1. Remove the transfer drum and holder assembly. 2. Remove the two springs from the attraction roller holder. 3. Remove the two springs from the discharge roller holder. 4. Remove the two extension springs holding the one end of the transfer drum sheet to the transfer drum. Note: Use cotton gloves to handle the transfer sheet. 5. Rotate the drum while peeling the sheet off the drum surface. 6. Remove the two screws from the gripper springs and remove the springs and holders. 7. Remove the sheet from the drum. 8. Pry off the two round plastic screw caps from the gripper assembly. 9. Remove the two screws from the gripper assembly and remove the assembly from the drum. Note: When reassembling, be sure the extension on the gripper rod is under the roller inside the drum. 4-56