Lexmark Optra C Service Manual - Page 98

5045-001 Dirty Print Service Check FRU Action 1 Fuser cleaning Check the cleaning belt for proper operation and belt condition. Replace if necessary. 2 Fuser upper See "Spacing Table Service Check" on page 2-69 to roller aid in diagnosing the dirty or failing FRU. Photoconductor Toner cartridge Attraction roller 3 Poor attraction/ discharge 4 Poor attraction/ discharge 5 Poor attraction/ discharge Is recommended print paper being used? Advise the user to use recommended paper. Is the attraction roller or the discharge roller deformed or soiled? Replace the affected roller. Is the high-voltage contact of the attraction roller or the discharge roller soiled or burnt? Clean the contact. Replace it if it cannot be cleaned. 6 Poor attraction/ discharge Are the springs pressing the attraction roller or the discharge roller against the transfer drum stretched? Replace the spring(s). 7 Paper 8 Paper path Paper must be the correct weight. Check for soiled paper being used. Clean the feed guide or the fuser entrance guide. Check the entire paper path for paper (especially the photoconductor and cleaning brush assembly). 2-66