Lexmark Optra C Service Manual - Page 181

5045-001 Transfer Drum Front and Rear Slide Assemblies See Assembly 28-2, 28-4. 1. Remove the transfer drum assembly. 2. Remove the two screws from the front or rear slide assembly and remove the slide. Transfer Drum Discharge Roller See Assembly 29-12. 1. Remove the transfer drum and holder assembly. 2. Remove the spring at each end of the discharge roller holder. 3. Place a screwdriver blade through the holes in each end of the discharge roller holder and push the discharge roller out of the holder. 4. Remove the nylon guide roller from each end of the discharge roller. CAUTION: Do not touch the discharge roller with your bare hands. Transfer Drum HV Contact Assembly See Assembly 28-3. 1. Remove the transfer drum assembly. 2. Remove the screw from the attraction roller mounting pin located on the lower left corner of the transfer drum holder front plate and remove the pin. 3. Remove the attraction roller holder from the transfer drum holder. 4. Remove the three screws from the HV contact assembly and remove the assembly. Repair Information 4-55