Lexmark Optra C Service Manual - Page 39
Diagnostic Information 2-7, Error 46, Toner Cartridge Not Installed Correctly
View all Lexmark Optra C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5045-001 Code Symptom 46 Toner Cartridge Not Correctly Installed If there is a problem with one or more toner cartridges, check the following: 1. The latch at the rear that keeps the cartridge cover locked. 2. The hook at the rear that locks the cartridge into the rotary assembly. 3. The three color-keyed locating pins in the front of the cartridge (that face to the rear). 4. If a good cartridge causes Code 46 to display, see "Error (46) Toner Cartridge Not Installed Correctly" on page 2-14. 80 Scheduled Maintenance - see Code 44. 83 Photoconductor Unit Life Warning The photoconductor is nearing end-of-life. Do not replace the photoconductor with another used unit for troubleshooting purposes. If a new unit is installed and the code 83 message remains, carefully check the density sensor ribbon cable. 84 Oil Bottle Low - see Code 42. 85 - 88 Toner Low Remove and gently shake the cartridges. This may allow additional usage. At this point, print quality may have degraded and background will become more pronounced (end-of-life). If this code applies to one cartridge which is known to be new, check the two windows on the cartridge for damage or debris. If the machine reports all cartridges low, check the toner low detect PCT (Beam) and toner low detect PCB (Receive). Refer to the Block Wiring Diagram Sheet. Diagnostic Information 2-7