Lexmark Optra C Service Manual - Page 191
External Covers, Feed Roller Unit 1, Front Pickup Unit, Repair Information 4-65
View all Lexmark Optra C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
5045-001 External Covers See Assembly 34. 1. Remove the cassette tray. 2. Open the Open/Close cover. 3. Remove the three screws and the front cover. 4. Remove the two screws and the rear cover. 5. Remove the two screws and the left cover. 6. Remove the one screw and the right cover. 7. Remove the two E-clips and the two screws and right Open/ Close cover hinge, the connecting plate and remove the Open/ Close door. Feed Roller (Unit 1) See Assembly 35-16. 1. Remove the cassette. 2. Open the Open/Close Door. 3. Remove the screw and the Feed Roller Unit 1. 4. Disengage the claw securing the gear, then remove the gear, shaft, and roller. Front Pickup Unit See Assembly 35-4. 1. Remove the cassette. 2. Remove the front cover. 3. Remove the Open/Close cover. 4. Remove the six screws and gear cover. 5. Remove the seven screws, the E-clip and disconnect the three connectors. 6. Remove the pickup unit. Repair Information 4-65