Netgear FVS318 FVS318v3 Reference Manual - Page 195

Appendix E VPN Configuration of NETGEAR FVS318v3 This is a case study on how to configure a secure IPSec VPN tunnel on a NETGEAR FVS318v3. This case study follows the VPN Consortium interoperability profile guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html). This study covers the following situations: • FVS318v3 to FVS318v3 (see page E-6) • FVS318v3 to FVS318v2 (see page E-13) • FVS318v3 to FVL328 (see page E-20) • FVS318v3 to VPN Client (see page E-27) Note: Product updates are available on the NETGEAR, Inc. Web site at http://www.netgear.com/support/main.asp. Case Study Overview The procedure for configuring a VPN tunnel between two gateway endpoints is as follows: 1. Gather the network information 2. Configure gateway A 3. Configure gateway B 4. Activate the VPN tunnel Gathering the Network Information The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Check that there are no firewall restrictions. VPN Configuration of NETGEAR FVS318v3 E-1 January 2005