Netgear FVS318 FVS318v3 Reference Manual - Page 222

Reference Manual for the ProSafe VPN Firewall FVS318v3 Configuring the VPN Tunnel Note: This scenario assumes all ports are open on the FVS318v3. 10.5.6.0/24 Scenario 1 Client B Gateway A LAN IP 10.5.6.1 Router WAN IP 14.15.16.17 WAN IP 0.0.0.0 PC (running NETGEAR ProSafe VPN Client) Figure E-19: LAN to PC VPN access from an FVS318v3 to a VPN Client Use this scenario illustration and configuration screens as a model to build your configuration. 1. Log in to the FVS318v3 labeled Gateway A as in the illustration (Figure E-19). Log in at the default address of http://192.168.0.1 with the default user name of admin and default password of password (or using whatever password and LAN address you have chosen). Note: Based on the network addresses used in this example, you would log in to the LAN IP address of http://10.5.6.1 at Gateway A. 2. Use the VPN Wizard to configure the FVS318v3 at Gateway A. Follow the steps illustrated in Figure E-19 (the resulting parameter screens are shown in Figure E-20): • Connection Name: Scenario_1 (in this example) • Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel endpoints • Connection Type: A Remote VPN Client E-28 VPN Configuration of NETGEAR FVS318v3 January 2005