Netgear FVS318 FVS318v3 Reference Manual - Page 196
Configuring the Gateways, Con Gate A.
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Reference Manual for the ProSafe VPN Firewall FVS318v3 10.5.6.0/24 LAN IP 10.5.6.1 VPN Consortium Example Network Interface Addressing 172.23.9.0/24 Gateway A 14.15.16.17 WAN IP 22.23.24.25 WAN IP Gateway B LAN IP 172.23.9.1 Figure E-1: Addressing and subnets used for this case study Configuring the Gateways Configure each gateway as summarized in Figure E-2 and Figure E-3: 1. Configure Gate A. a. Log in to the router at Gateway A. b. Use the VPN Wizard to configure this router. Enter the requested information as prompted by the VPN Wizard: • Connection Name and Pre-Shared Key • Remote WAN IP address • Remote LAN IP Subnet: IP Address and Subnet Mask: 2. Repeat the above steps for Gateway B. a. Log in to the router at Gateway B. b. Use the VPN Wizard to configure this router. Enter the requested information as prompted by the VPN Wizard. Note: The WAN and LAN IP addresses must be unique at each end of the VPN tunnel. E-2 VPN Configuration of NETGEAR FVS318v3 January 2005