Netgear FVS318 FVS318v3 Reference Manual - Page 201
E-5, Repeat the process using the VPN Wizard to con the FVS318v3 at Gateway B.
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Reference Manual for the ProSafe VPN Firewall FVS318v3 Note: Based on the network addresses used in this example, you would log in to the LAN IP address of http://10.5.6.1 at Gateway A. 2. Use the VPN Wizard to configure the FVS318v3 at Gateway A. Follow the steps listed in Figure E-2 and Figure E-3 using the following parameters as illustrated in Figure E-6: • Connection Name: Scenario_1 (in this example) • Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel endpoints • Remote WAN IP address: 22.23.24.25 (in this example), must be unique at each VPN tunnel endpoint • Remote LAN IP Subnet - IP Address: 172.23.9.1 (in this example), must be unique at each VPN tunnel endpoint - Subnet Mask: 255.255.255.0 (in this example) 3. Log in to the FVS318v3 labeled Gateway B as in the illustration (Figure E-5). Log in at the default address of http://192.168.0.1 with the default user name of admin and default password of password (or using whatever password and LAN address you have chosen). Note: Based on the network addresses used in this example, you would log in to the LAN IP address of http://172.23.9.1 at Gateway B. 4. Repeat the process using the VPN Wizard to configure the FVS318v3 at Gateway B. Follow the steps listed in Figure E-2 and Figure E-3, but use the following parameters instead as illustrated in Figure E-6: • Connection Name: Scenario_1 (in this example) • Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel endpoints • Remote WAN IP address: 14.15.16.17 (in this example), must be unique at each VPN tunnel endpoint VPN Configuration of NETGEAR FVS318v3 E-7 January 2005