Netgear FVS318 FVS318v3 Reference Manual - Page 62
Step 1: Configuring the Client-to-Gateway VPN Tunnel on the FVS318v3, admin, password, VPN Wizard
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Reference Manual for the ProSafe VPN Firewall FVS318v3 Step 1: Configuring the Client-to-Gateway VPN Tunnel on the FVS318v3 Note: This section uses the VPN Wizard to set up the VPN tunnel using the VPNC default parameters listed in Table 5-1 on page 5-4. If you have special requirements not covered by these VPNC-recommended parameters, refer to Chapter 6, "Advanced Virtual Private Networking" to set up the VPN tunnel. Follow this procedure to configure a client-to-gateway VPN tunnel using the VPN Wizard. 1. Log in to the FVS318v3 at its LAN address of http://192.168.0.1 with its default user name of admin and password of password. Click the VPN Wizard link in the main menu to display this screen. Click Next to proceed. Figure 5-4: VPN Wizard start screen 2. Fill in the Connection Name and the pre-shared key, select the type of target end point, and click Next to proceed. Note: The Connection Name is arbitrary and not relevant to how the configuration functions. 5-6 Basic Virtual Private Networking January 2005