Netgear FVS318 FVS318v3 Reference Manual - Page 30
Troubleshooting Tips, admin, password, Be sure to restart your network in this sequence - fvs318v3 default password
UPC - 606449023381
View all Netgear FVS318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Reference Manual for the ProSafe VPN Firewall FVS318v3 3. Click Done to finish. If you have trouble connecting to the Internet, see "Troubleshooting Tips" on page 3-6 to correct basic problems. Figure 3-6: NETGEAR Smart Wizard Configuration Assistant success screen Note: The Smart Wizard Configuration Assistant only appears when the firewall is in its factory default state. After you configure the VPN firewall router, it will not appear again. You can always connect to the firewall to change its settings. To do so, open a browser such as Internet Explorer and go to http://www.routerlogin.net. Then, when prompted, enter admin as the user name and password for the password both in lower case letters. You are now connected to the Internet! Troubleshooting Tips Here are some tips for correcting simple problems you may have. Be sure to restart your network in this sequence: 1. Turn off the VPN firewall router, shut down the computer, and unplug and turn off the modem. 2. Turn on the modem and wait two minutes 3. Turn on the VPN firewall router and wait one minute 4. Turn on the computer. 3-6 Connecting the Firewall to the Internet January 2005