Nikon VAA109EA User Manual - Page 66
Auto Bracketing
View all Nikon VAA109EA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Auto Bracketing Bracketing is used to take a series of photographs of the same subject using a variety of exposure values that "bracket" optimum value as determined by the camera (or, in manual mode, by the photographer). This can be used to take multiple shots of the same subject at different exposure settings without stopping to adjust exposure compensation manually. Up to three photographs can be taken at exposure settings varying from +2 to -2 EV (these values are added to the value chosen for exposure compensation using the exposure compensation function described on the previous pages). Bracketing can be used in any exposure mode. 1 Holding down the BKT button (A), rotate the main command dial until BKT appears in the control panel on top of the camera (B). The indicator in the viewfinder and in the control panel on top of the camera will blink. A B 2 Holding the BKT button down (A), rotate the sub-command dial to choose a bracketing program (B). The bracketing programs available depend on Custom Setting 2 (see overleaf). A B Note Changes to exposure are effected by changing the shutter speed (manual and aperture-priority auto exposure modes), the aperture (shutter-priority auto), or both shutter speed and aperture (programmed auto). Flash and auto-exposure bracketing If a Speedlight is attached when bracketing is in effect, both flash level (TTL level as determined for the main subject) and auto-exposure will be changed for each exposure regardless of the exposure mode. Camera settings can be changed so that only one of flash-exposure bracketing or auto-exposure bracketing will be performed. See "Custom Settings," item 11. Camera Settings: Auto Bracketing 53