Home » Nokia Manuals » Network Security & Firewall Devices » Nokia IP1220 » Manual Viewer

Nokia IP1220 Installation Guide - Page 101

You might need to pull opposite ends of the DIMM alternately to gradually free it from

Add to My Manuals
Save this manual to your list of manuals

Page 101 highlights

Replacing or Upgrading Memory 4. Slide the chassis tray assembly forward, pressing the release tab on the right side of the assembly, and completely remove the chassis to expose the compact flash memory slot on the motherboard. 00049a 5. Remove the DIMM by pressing the two retaining clips outward and carefully pulling each DIMM upward. 00322 You might need to pull opposite ends of the DIMM alternately to gradually free it from the contact pins. 6. Press the new DIMM into the socket until it clicks into place. Note You must install DIMMs in pairs starting from the left. Insert a pair of DIMMS into adjacent slots J5/J6 and/or J7/J8, otherwise the DIMMS will not work. You can also use all four slots at one time. IP1220 and IP1260 Security Platforms Installation Guide 101

Section	Page
Title Page	1
Contact Information	3
Contents	5
Figures	9
Tables	11
About this Guide	13
In this Guide	13
Conventions this Guide Uses	14
Notices	14
Text Conventions	14
Related Documentation	15
1 Overview	17
About the Nokia IP1200 Series Security Platform	17
About the Nokia IP1200 Series Flash-Based Security Platforms	18
Managing the Nokia IP1200 Series Security Platform	19
Nokia IP1200 Series Security Platform Overview	19
Ethernet Management Ports	20
PMC Expansion Slots	21
Console Port	21
System Status LEDs	23
Hard-Disk Drives	24
Power Supplies and Fan Unit	25
Site Requirements	28
Safety Warnings and Cautions	28
Software Requirements	30
Product Disposal	30
2 Installing the Nokia IP1200 Series Appliance	33
Rack Mounting the Appliance	33
Before You Begin	34
3 Performing the Initial Configuration	39
Using a Console Connection	40
Connecting Power and Turning the Power On	40
Performing the Initial Configuration	42
Connecting Network Interfaces	44
Using Nokia Network Voyager	44
Viewing Nokia IPSO Documentation by Using Nokia Network Voyager	45
Using the Command-Line Interface	46
Using Nokia Horizon Manager	46
4 Installing and Replacing Network Interface Cards and Accelerated Data Path (ADP) Services Modules	49
Removing, Installing, and Replacing NICs or the ADP Module	50
Before You Begin	50
Configuring and Activating Interfaces	56
Monitoring Network Interface Cards	56
5 About IP1200 Series Appliance Network Interface Cards	57
Four-Port 10/100 Ethernet NICs	58
10/100 Ethernet NIC Features	58
Ethernet NIC Connectors and Cables	59
Two-Port and Four-Port Copper Gigabit Ethernet NICs	60
Copper Gigabit Ethernet NIC Features	61
Performance Considerations	62
Copper Gigabit Ethernet NIC Connectors and Cables	62
Two-Port Fiber-Optic Gigabit Ethernet NICs	64
Fiber-Optic Gigabit Ethernet NIC Features	64
Fiber-Optic Gigabit Ethernet NIC Connectors and Cables	65
Performance Considerations	65
6 About IP1200 Appliance ADP Services Modules	67
Installing and Replacing ADP Modules	68
Nokia ADP Card LED Reference Information	71
Configuring Nokia IPSO for IP1220 and IP1260 ADP Interfaces	71
Effect on Interfaces	71
Nokia ADP Card Interface Names for IP1220 and IP1260 Appliances	72
Configuration Example with VRRP	73
7 Installing and Replacing Components Other than Network Interface Cards (NICs) and Accelerated D...	81
Replacing a Hard-Disk Drive	82
Disk Mirroring	82
Hard-Disk Drive Hot Swap Feature	83
Before You Begin	83
Installing a PC Card	88
Storing System Logs on the Flash-Memory PC Card	94
Disabling Flash-Memory PC Cards	94
Transferring Files with the Flash-Memory PC Card	95
Replacing the Compact Flash Memory Card	96
Replacing or Upgrading Memory	99
Before You Begin	99
Installing a Nokia Encryption Accelerator Card	102
Before You Begin	103
Configuring Software to Use Hardware Acceleration	106
Installing a Fan Unit	107
Before You Begin	107
Installing or Replacing a Power Supply	108
Before You Begin	109
Monitoring the Power Supply	110
Replacing Motherboard Batteries	110
Before You Begin	111
8 Troubleshooting	113
General Troubleshooting Information	113
A Technical Specifications	119
Space Requirements	119
B Compliance Information	121
Declaration of Conformity	121
Compliance Statements	122
FCC Notice (US)	123
Index	125
Numerics	125
A	125
C	125
D	125
E	125
F	125
G	125
H	126
I	126
L	126
M	126
N	126
O	126
P	126
R	126
S	126
T	126
U	127
V	127

Match case Limit results 1 per page

Replacing or Upgrading Memory

IP1220 and IP1260 Security Platforms Installation Guide

101

Slide the chassis tray assembly forward, pressing the release tab on the right side of the

assembly, and completely remove the chassis to expose the compact flash memory slot on

the motherboard.

Remove the DIMM by pressing the two retaining clips outward and carefully pulling each

DIMM upward.

You might need to pull opposite ends of the DIMM alternately to gradually free it from the

contact pins.

Press the new DIMM into the socket until it clicks into place.

Note

You must install DIMMs in pairs starting from the left. Insert a pair of DIMMS into

adjacent slots J5/J6 and/or J7/J8, otherwise the DIMMS will not work. You can also use

all four slots at one time.

00049a

00322