Nokia IP1220 Installation Guide - Page 51
Continue to press or push the levers outward until the PMC carrier or ADP module is
View all Nokia IP1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Removing, Installing, and Replacing NICs or the ADP Module Caution To avoid damage to the ejector and locking lever, loosen the retaining screw behind each ejector and locking lever before you remove the PMC carrier or ADP module. 3. Press the red buttons on the ejector and locking levers on the PMC carrier or ADP module. The lock is released. Note Pressing both red buttons on the front of the ejector and locking levers disengages the lock and removes power from the PMC carrier or ADP module. The power LED on the front of the PMC carrier or ADP module is no longer illuminated when the power is removed. 4. Press or push the levers toward the outer edges of the IP1200 Series. Ejector and locking levers Push red button to disengage or engage lock IPHILO Release or lock into place 00310b.2 5. Continue to press or push the levers outward until the PMC carrier or ADP module is released and extends slightly beyond the front panel of the IP1200 Series. IP1220 and IP1260 Security Platforms Installation Guide 51