Nokia IP1220 Installation Guide - Page 85
Tighten the screws on both sides of the hard-disk drive.
View all Nokia IP1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Replacing a Hard-Disk Drive 4. When the status LED stops blinking, use your thumb or forefinger to press the ejector and locking lever to eject the hard-disk drive from the chassis. Push red button to disengage lock Release or lock into place 00320 5. Gently pull the hard-disk drive forward to remove it from the appliance. IP1260 00316.2 6. Install a replacement hard-disk drive into the empty hard-disk drive bay. 7. Lock the hard-disk drive in place by pressing the ejector and locking lever. 8. Tighten the screws on both sides of the hard-disk drive. 9. Press the recessed hot swap button again to restore power to the hard-disk drive. The IP1200 Series recognizes the new hard-disk drive. 10. Use Nokia Network Voyager, Lynx, or the CLI to implement disk mirroring. IP1220 and IP1260 Security Platforms Installation Guide 85