Home » Nokia Manuals » Network Security & Firewall Devices » Nokia IP1220 » Manual Viewer

Nokia IP1220 Installation Guide - Page 95

Transferring Files with the Flash-Memory PC Card

Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Installing a PC Card 2. Enter the following command, where the number 1 or 2 indicates the PC-card slot: set optional-disk device-id off 3. Enter the following command: halt or reboot You can now remove the flash-memory PC card. Caution When you remove the card, hold the flash-memory PC card while you push the eject button to prevent the card from ejecting too quickly. Transferring Files with the Flash-Memory PC Card You can copy configuration files between the internal compact flash memory and the flashmemory PC card. If you do not use Nokia Network Voyager to configure the flash-memory PC card as an optional disk, you must mount the flash-memory PC card when you insert it in the PC-card slot, and you must unmount the flash-memory PC card before you remove it. You do not need to reboot or shut down the system if you manually mount and unmount the flash-memory PC card. To transfer Nokia IPSO images or configuration files to the flash-memory PC card: 1. Insert the flash-memory PC card into the IP1200 Series appliance. 2. Connect to the IP1200 Series appliance by using a console or terminal connection. 3. Mount the flash-memory PC card by using the following command: mount /dev/wd1 /cdrom The /cdrom directory is a default directory in Nokia IPSO for mounting media. 4. Use the cp command to transfer Nokia IPSO images or configuration files to and from the flash-memory PC card. For example, to copy the current Nokia IPSO image from the compact flash to the flashmemory PC card, use the following command: cp /image/current/ipso.tgz /cdrom/ 5. Use the following command to unmount the flash-memory PC card before you eject it: umount /cdrom 6. To remove the card, slowly push the eject button located to the left of the card. Caution Hold the flash-memory PC card while you push the eject button to prevent the card from ejecting too quickly. IP1220 and IP1260 Security Platforms Installation Guide 95

Section	Page
Title Page	1
Contact Information	3
Contents	5
Figures	9
Tables	11
About this Guide	13
In this Guide	13
Conventions this Guide Uses	14
Notices	14
Text Conventions	14
Related Documentation	15
1 Overview	17
About the Nokia IP1200 Series Security Platform	17
About the Nokia IP1200 Series Flash-Based Security Platforms	18
Managing the Nokia IP1200 Series Security Platform	19
Nokia IP1200 Series Security Platform Overview	19
Ethernet Management Ports	20
PMC Expansion Slots	21
Console Port	21
System Status LEDs	23
Hard-Disk Drives	24
Power Supplies and Fan Unit	25
Site Requirements	28
Safety Warnings and Cautions	28
Software Requirements	30
Product Disposal	30
2 Installing the Nokia IP1200 Series Appliance	33
Rack Mounting the Appliance	33
Before You Begin	34
3 Performing the Initial Configuration	39
Using a Console Connection	40
Connecting Power and Turning the Power On	40
Performing the Initial Configuration	42
Connecting Network Interfaces	44
Using Nokia Network Voyager	44
Viewing Nokia IPSO Documentation by Using Nokia Network Voyager	45
Using the Command-Line Interface	46
Using Nokia Horizon Manager	46
4 Installing and Replacing Network Interface Cards and Accelerated Data Path (ADP) Services Modules	49
Removing, Installing, and Replacing NICs or the ADP Module	50
Before You Begin	50
Configuring and Activating Interfaces	56
Monitoring Network Interface Cards	56
5 About IP1200 Series Appliance Network Interface Cards	57
Four-Port 10/100 Ethernet NICs	58
10/100 Ethernet NIC Features	58
Ethernet NIC Connectors and Cables	59
Two-Port and Four-Port Copper Gigabit Ethernet NICs	60
Copper Gigabit Ethernet NIC Features	61
Performance Considerations	62
Copper Gigabit Ethernet NIC Connectors and Cables	62
Two-Port Fiber-Optic Gigabit Ethernet NICs	64
Fiber-Optic Gigabit Ethernet NIC Features	64
Fiber-Optic Gigabit Ethernet NIC Connectors and Cables	65
Performance Considerations	65
6 About IP1200 Appliance ADP Services Modules	67
Installing and Replacing ADP Modules	68
Nokia ADP Card LED Reference Information	71
Configuring Nokia IPSO for IP1220 and IP1260 ADP Interfaces	71
Effect on Interfaces	71
Nokia ADP Card Interface Names for IP1220 and IP1260 Appliances	72
Configuration Example with VRRP	73
7 Installing and Replacing Components Other than Network Interface Cards (NICs) and Accelerated D...	81
Replacing a Hard-Disk Drive	82
Disk Mirroring	82
Hard-Disk Drive Hot Swap Feature	83
Before You Begin	83
Installing a PC Card	88
Storing System Logs on the Flash-Memory PC Card	94
Disabling Flash-Memory PC Cards	94
Transferring Files with the Flash-Memory PC Card	95
Replacing the Compact Flash Memory Card	96
Replacing or Upgrading Memory	99
Before You Begin	99
Installing a Nokia Encryption Accelerator Card	102
Before You Begin	103
Configuring Software to Use Hardware Acceleration	106
Installing a Fan Unit	107
Before You Begin	107
Installing or Replacing a Power Supply	108
Before You Begin	109
Monitoring the Power Supply	110
Replacing Motherboard Batteries	110
Before You Begin	111
8 Troubleshooting	113
General Troubleshooting Information	113
A Technical Specifications	119
Space Requirements	119
B Compliance Information	121
Declaration of Conformity	121
Compliance Statements	122
FCC Notice (US)	123
Index	125
Numerics	125
A	125
C	125
D	125
E	125
F	125
G	125
H	126
I	126
L	126
M	126
N	126
O	126
P	126
R	126
S	126
T	126
U	127
V	127

Match case Limit results 1 per page

Installing a PC Card

IP1220 and IP1260 Security Platforms Installation Guide

Enter the following command, where the number 1 or 2 indicates the PC-card slot:

set optional-disk device-id <1 | 2> off

Enter the following command:

halt or reboot

You can now remove the flash-memory PC card.

Caution

When you remove the card, hold the flash-memory PC card while you push the eject

button to prevent the card from ejecting too quickly.

Transferring Files with the Flash-Memory PC Card

You can copy configuration files between the internal compact flash memory and the flash-

memory PC card. If you do not use Nokia Network Voyager to configure the flash-memory PC

card as an optional disk, you must mount the flash-memory PC card when you insert it in the

PC-card slot, and you must unmount the flash-memory PC card before you remove it. You do

not need to reboot or shut down the system if you manually mount and unmount the

flash-memory PC card.

To transfer Nokia IPSO images or configuration files to the flash-memory PC

card:

Insert the flash-memory PC card into the IP1200 Series appliance.

Connect to the IP1200 Series appliance by using a console or terminal connection.

Mount the flash-memory PC card by using the following command:

mount /dev/wd1 /cdrom

The /cdrom directory is a default directory in Nokia IPSO for mounting media.

Use the cp command to transfer Nokia IPSO images or configuration files to and from the

flash-memory PC card.

For example, to copy the current Nokia IPSO image from the compact flash to the flash-

memory PC card, use the following command:

cp /image/current/ipso.tgz /cdrom/

Use the following command to unmount the flash-memory PC card before you eject it:

umount /cdrom

To remove the card, slowly push the eject button located to the left of the card.

Caution

Hold the flash-memory PC card while you push the eject button to prevent the card

from ejecting too quickly.